Allen-Bradley Powerflex 70 AC Drive
- Product number: 20AD027A0AYNANC0
- Lifecycle status: ACTIVE MATURE
- Product family: Powerflex 70
Technical Specifications:
- PowerFlex 70 AC Drive 27 A at 20 Hp 20A
- Degree of protection (IP): IP20
- Shock: 15 G peak for 11 ms duration (±1.0 ms)
- Vibration: 0.152 mm (0.006 inch) displacement, 1 G peak
- Number of analogue outputs: 1
- Mains voltage: 480 V
- Integrated breaking resistance: No
- Internal dynamic brake resistors: 62 Ohm
- Brake IGBT installed
- Bus under voltage output shutoff: 437V DC @ 480V
- Bus under voltage fault level: 300V DC @ 480V
- No communication module
- AC input undervoltage trip: 280V AC @ 480V
- Bus voltage, nom: 648V DC @ 480V
- Bus overvoltage trip: 810V DC @ 480V
- Circuit breaker current rating, max: 100 A @ 480V AC, 3-phase
- Motor circuit protector current rating, max: 50 A @ 480V AC, 3-phase
- Output current rating, continuous: 27 A @ 480V AC, 3-phase
- Output current rating, 1 min: 33 A @ 480V AC, 3-phase
- Output current rating, 3 sec: 44 A @ 480V AC, 3-phase
- Logic control ride-thru: 0.5 seconds minimum, 2 seconds typical
- Without drive mounted brake resistor
- Input current rating: 24.8 A @ 480V AC, 3-phase
- Carrier frequency: Standard control: 2, 3, 4, 5, 6, 7, 8, 9, and 10 kHz, vector control: 2, 4, 8, and 12 kHz, drive rating based on 4 kHz
- Encoder quadrature: 90° ±27°
- AC input overvoltage trip: 570V AC @ 480V
- Input power rating: 20.6 kVA @ 480V AC, 3-phase
- Dual element time delay fuse current rating: 35…60 A @ 480V AC, 3-phase
- Non-time delay fuse current rating: 35…100 A @ 480V AC, 3-phase
- Heat sink thermistor: Monitored by microprocessor overtemp trip
- Drive to motor power ratio, max: Recommended not greater than 2:1 ratio
Product Features:
- Multiple programmable stop modes including — Ramp, Coast, DC-brake, Fast brake, Ramp-to-hold and S-curve
- Frequency accuracy: Digital input: within ±0.01% of set output frequency
- Acceleration/deceleration: Two independently programmable accel and decel times. Each time can be programmed from 0…3600 seconds in 0.1 second increments
- Number of digital inputs: 6
- Number of digital outputs: 2
- Number of analogue inputs: 2
- Internal watts loss: 42.9 W @ 480V, 20 Hp normal duty
- Supporting protocol for DeviceNet: Yes
- Human interface model: No HIM-blank plate
- Application in industrial area permitted: Yes
- External watts loss: 432.9 W @ 480V, 20 Hp normal duty
- Total watts loss: 475.8 W @ 480V, 20 Hp normal duty
- Supporting protocol for EtherNet/IP: Yes
- Mains frequency: 50 Hz
- Output frequency range: Standard control: 0…400 Hz, enhanced control: 0…500 Hz
- Internal EMC filtering: Second environment filter per CE EMC directive (89/336/EEC)
- Feedback option
* Buyer is responsible for all customs, brokerage fees, local levies and taxes.*
KJ CONTROLS LTD IS NOT AN AUTHORIZED DISTRIBUTOR FOR ALLEN-BRADLEY
(20A1 - Shop 2)