TURCK Rotation Speed Monitor
- Part number: MS25-UI/24VDC (MS25UI24VDC)
- Lifecycle status: END OF LIFE - Discontinued.
- Alternate identifier: 0508207
- UPC: 4047101059793
Technical Specifications:
- Frequency to current/voltage conversion
- Monitoring range: 10 mHz… 1 660 Hz (0.6…100 000 min-1)
- Line monitored for wire-break/short-circuit
- Removable terminal blocks
- Excellent temperature stability
- Pulse output
- Floating averaging for signal steadying
- Complete galvanic isolation
- Input reverse-polarity protected
- Nominal voltage Operating voltage Frequency Operating voltage range Power consumption Universal voltage supply unit 20…250 VAC 40…70 Hz 20…250 VDC ð 3 W
- Monitoring range/Setting range Max. input frequency Pulse time Pulse pause NAMUR input NAMUR No-load voltage Short-circuit current Input resistance Cable resistance Switch-on threshold Switch-off threshold Wire breakage threshold Short-circuit threshold 3-wire input Current 0-signal signal External signal source
- 0-signal signal Input resistance
- ð 0.06…100000 min-1 150000 min-1 ï 0.02 ms ï 0.02 ms EN 60947-5-6 8.2 VDC 8.2 mA kò
- ð 50 ò 1.75 mA 1.55 mA ð 0.06 mA ï 6.4 mA ð 15 mA 0…3VDC 5…30 VDC 0…3 VDC 5…30 VDC 26000 ò
- Product Features:
- Multi-Safe utilizing various safety features, such as complete galvanic isolation, input reverse-polarity protection, and line monitoring for wire-break/short-circuit.
- The device can accommodate NAMUR sensors, 3-wire PNP sensors or other voltage sources with pulse levels between 9 and 30 VDC.
- The speed range, from 0.6-100,000 pulses/min or 0.01-1660 Hz, is adjusted digitally using four multi-position switches.
- The voltage output supplies 0-10 V and the current output supplies 0/4-20 mA.
- The output current can be changed from 0…20 mA to 4…20 mA by bridging the clamps 13/14.
- If NAMUR sensors are connected, the input circuits are monitored for wire-break and short-circuit.
- In the event of errors, the dual color LED changes from green to red and the output current is reset to 0 mA (also in live-zero mode) resp. 0 V.
- The yellow LED for input pulses indicates wire-break and short circuit (wire-break: LED off).
- In case 3-wire sensors are used, only the wire-break function for the power cable is active. Wire-break and short-circuit at the sensor output cable are not detected.
- To connect external signal sources use terminals 11 and 9. To suppress error messages, a 1…10 kò resistor must be connected between terminals 10 and 11.
- Signal steadying is achieved with an attenuation factor between 1 and 10. Factor 1 (1 period) means - no attenuation. The principle of attenuation is based on a floating average resulting from the adjusted number of pulses.
- Protection class IP20
- Ambient temperature -25…+60 °C
- Dimensions 75 x 50 x 110 mm
- Weight 238 g
- DIN rail (NS35) or panel mounting
- Housing material Polycarbonate/ABS
- 2 × 8-pin removable terminal blocks, reverse polarity protected, screw connection x 2.5 mm2 / 2 x 1.5 mm2
Product Summary:
The TURCK MS25-UI/24VDC is a versatile device designed for industrial automation and motion control systems, serving as a Rotation Speed Monitor within the Signal Conditioners product family. Its primary function is to convert digital input frequency to analog current and voltage signals, which is essential in industrial automation systems. The device is compatible with NAMUR sensors, 3-wire PNP sensors, or other voltage sources with pulse levels between 9 and 30 VDC, and can monitor frequencies from 10 mHz to 1 660 Hz (0.6 to 100 000 min-1). It is equipped with several safety features, including monitoring the input circuits for wire-break and short-circuit, providing complete galvanic isolation, and protection against reverse polarity on the input. The device is user-friendly with removable terminal blocks for easy installation and maintenance, and provides a pulse output for triggering other devices or processes. It also uses a floating averaging method to steady the signal, reducing noise and improving signal accuracy. The device is compact, measuring 75 x 50 x 110 mm, weighs 238 g, and can be mounted on a DIN rail (NS35) or panel. The housing material is made of Polycarbonate/ABS. In conclusion, the TURCK MS25-UI/24VDC is a robust and reliable device that enhances the safety, reliability, and efficiency of industrial automation and motion control systems.
* Buyer is responsible for all customs, brokerage fees, local levies and taxes.*
KJ CONTROLS LTD IS NOT AN AUTHORIZED DISTRIBUTOR FOR TURCK
The Original Manufacturer's Warranty Does Not Apply
(15B2)
